Description

VMECA Minimultiple Pumps are stacked with mini pumps. Each pump creates vacuum as an individual pump. The advantages of this unit is that it can be operated using just two control valve while retaining individual vacuum lines separate to one another, therefore if any leakage or surface deformation occurs and one pad loses it vacuum, it does not effect the vacuum level in the other pads. Pumps can be stacked up from 2-12 units depending upon requirements.

Build an Order #

1. Basic Model

SymbolDescription
VTM10Minimultiple, VTM10

2. Number of Stacks

SymbolDescription
2Minimultiple, VTM10, 2-stacked pump
4Minimultiple, VTM10, 4-stacked pump
6Minimultiple, VTM10, 6-stacked pump
8Minimultiple, VTM10, 8-stacked pump
10Minimultiple, VTM10, 10-stacked pump
12Minimultiple, VTM10, 12-stacked pump

3. Air Control Valve

SymbolDescription
BlankNo air control valve
A1Air control valve, AC 110V
A2Air control valve, AC 220V
A3Air control valve, DC 24V

4. Valve Terminal

SymbolDescription
BlankNo air control valve  ☛ “Option 2”, Air control valve
DNSolenoid terminal, DIN type, No lead wire
DLSolenoid terminal, DIN type, No lead wire, Lamp
CLSolenoid terminal, Connector type, 30 cm lead wire
 ☛ “The valve terminal ” option is only available when you chose air control valve.
 ☛ “CL” option is only available with DC24V.
2BSolenoid terminal, DIN, 2-in-1 BUS cable

5. Vacuum Port

SymbolDescription
2Push-in fitting, 2 mm inner diameter
4Push-in fitting, 4 mm inner diameter

6. Sealing Material

SymbolDescription
BlankNBR sealing material
VViton sealing material
EEPDM sealing material

Specifications

1. General Specifications

Max Vacuum Level-85 kPa
Open Vacuum Flow35 Nl/min
Feed Pressure5.5 bar (Max 7 bar)
Air Consumption42 Nl/min
Temperature-20 ~ 80 ℃
Weight: VTM10X2:67 g (Increased 13 g per additional stack)
Weight: VTM10X4:245 g (Increased 18 g per additional stack)

2. Vacuum  Flow

Max VacuumFeed PressureVacuum Flow (Nl/min) at different vacuum level (-kPa)
-kPabar0102030405060708090
855.5352925231916124.81.32

3. Evacuation Time

Feed PressureAir ConsumptionEvacuation time in sec per liter to reach different vacuum level (-kPa)
barNl/min102030405060708090
5.5420.1090.2780.500.7881.1781.722.6355.158

Dimensions

VTM10X(2~3):
Unit: mm

PumpL1L2
2-Stack2894
3-Stack35101
NoDescription
1Compressed-Air Port, G 1/8″
2Vacuum Port, ∅2 or ∅4mm
3Exhaust Port
4Air Control Valve
VTM10X(4~7):
Unit: mm

PumpL1L2
4-Stack38.348.3
5-Stack45.555.5
6-Stack5363
7-Stack6070
NoDescription
1Compressed-Air Port, G 1/8″
2Vacuum Port, ∅2 or ∅4mm
3Exhaust Port
4Air Control Valve
VTM10X(8~16):
Unit: mm

PumpL1L2
8-Stack67.577.5
9-Stack74.884.8
10-Stack8292
11-Stack88.598.5
12-Stack96106
13-Stack103.2113.2
14-Stack111121
15-Stack118128
16-Stack125.2135.2
NoDescription
1Compressed-Air Port, G 1/8″
2Vacuum Port, ∅2 or ∅4mm
3Exhaust Port
4Air Control Valve

Order Numbers

Vacuum Pumps & Spare Parts

Part NumberDescription
MS18-3-12/2-way sol valve, G1/8″ inlet, DC 24V, DIN type
MS18-3-22/2-way sol valve, G1/8″ inlet, DC 24V, DIN type, Lamp
MS18-3-32/2-way sol valve, G1/8″ inlet, DC 24V, Conn. type, 30 cm lead wire & Lamp
MS18-2-12/2-way sol valve, G1/8″ inlet, AC 220V, DIN type
MS18-2-22/2-way sol valve, G1/8″ inlet, AC 220V, DIN type, Lamp
MS18-1-12/2-way sol valve, G1/8″ inlet, AC 110V, DIN type
MS18-1-22/2-way sol valve, G1/8″ inlet, AC 110V, DIN type, Lamp
Seal KitPlease contact VMECA.
REQUEST A QUOTE

Downloads

Catalog & CAD files
CAD 2D File
VTM10X10
VTM10X11
VTM10X12
VTM10X13
VTM10X14
VTM10X15
VTM10X16
VTM10X2
VTM10X3
VTM10X4
VTM10X5
VTM10X6
VTM10X7
VTM10X8
VTM10X9
CAD 3D File
VTM10X10
VTM10X11
VTM10X12
VTM10X13
VTM10X14
VTM10X15
VTM10X16
VTM10X2
VTM10X3
VTM10X4
VTM10X5
VTM10X6
VTM10X7
VTM10X8
VTM10X9
Catalog
VTM10X(n)

You may also like…