VTM5X(n)
描述
VMECA Minimultiple Pumps are stacked with mini pumps. Each pump creates vacuum as an individual pump. The advantages of this unit is that it can be operated using just two control valve while retaining individual vacuum lines separate to one another, therefore if any leakage or surface deformation occurs and one pad loses it vacuum, it does not effect the vacuum level in the other pads. Pumps can be stacked up from 2-16 units depending upon requirements.
型号标注方式 #
1. 基本型号
| 型号 | 说明 |
| VTM5 | Minimultiple, VTM5 |
2. Number of Stacks
| 型号 | 说明 |
| 2 | Minimultiple, VTM5, 2-stacked pump |
| 4 | Minimultiple, VTM5, 4-stacked pump |
| 6 | Minimultiple, VTM5, 6-stacked pump |
| 8 | Minimultiple, VTM5, 8-stacked pump |
| 10 | Minimultiple, VTM5, 10-stacked pump |
| 12 | Minimultiple, VTM5, 12-stacked pump |
| 14 | Minimultiple, VTM5, 14-stacked pump |
| 16 | Minimultiple, VTM5, 16-stacked pump |
3. 压缩空气控制阀
| 型号 | 说明 |
| Blank | No air control valve |
| A1 | Air control valve, AC 110V |
| A2 | Air control valve, AC 220V |
| A3 | Air control valve, DC 24V |
4. 电子阀的电缆
| 型号 | 说明 |
| Blank | No air control valve ☛ “Option 2”, Air control valve |
| DN | Solenoid terminal, DIN type, No lead wire |
| DL | Solenoid terminal, DIN type, No lead wire, Lamp |
| CL | Solenoid terminal, Connector type, 30 cm lead wire |
| ☛ “The valve terminal ” option is only available when you chose air control valve. | |
| ☛ “CL” option is only available with DC24V. | |
| 2B | Solenoid terminal, DIN, 2-in-1 BUS cable |
5. 真空端口
| 型号 | 说明 |
| 2 | Push-in fitting, 2 mm inner diameter |
| 4 | Push-in fitting, 4 mm inner diameter |
6. 密封材质
| 型号 | 说明 |
| Blank | NBR sealing material |
| V | Viton sealing material |
| E | EPDM sealing material |
技术参数
1. 功能技术参数
| 真空抽吸流量 | -85 kPa |
| 最大抽吸真空流量 | 27 Nl/min |
| 供给压缩空气压力 | 5.5 bar (Max 7 bar) |
| 压缩空气消耗量 | 21 Nl/min |
| 工作温度 | -20 ~ 80 ℃ |
| 重量-基本真空发生器 | 67 g (Increased 13 g per additional stack) |
2. 真空抽吸流量
| 最高真空度 | 供给压缩空气压力 | 不同真空度下 (-kPa) 抽吸流量 (Nl/m) | |||||||||
| -kPa | bar | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 |
| 85 | 5.5 | 27 | 16 | 13 | 12 | 11 | 8 | 6 | 2.4 | 0.66 | – |
3. Evacuation Time
| 供给压缩空气压力 | 压缩空气消耗量 | Evacuation time in sec per liter to reach different vacuum level (-kPa) | ||||||||
| bar | Nl/min | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 |
| 5.5 | 21 | 0.218 | 0.556 | 1.00 | 1.576 | 2.356 | 3.44 | 5.27 | 10.216 | – |
尺寸
D下载
| VTM5X(2~3): |
| VTM5X(4~16): |
订购编码
真空发生器 & 其他元件
| 型号 | 说明 |
| MS18-3-1 | 2/2-way sol valve, G1/8″ inlet, DC 24V, DIN type |
| MS18-3-2 | 2/2-way sol valve, G1/8″ inlet, DC 24V, DIN type, Lamp |
| MS18-3-3 | 2/2-way sol valve, G1/8″ inlet, DC 24V, Conn. type, 30 cm lead wire & Lamp |
| MS18-2-1 | 2/2-way sol valve, G1/8″ inlet, AC 220V, DIN type |
| MS18-2-2 | 2/2-way sol valve, G1/8″ inlet, AC 220V, DIN type, Lamp |
| MS18-1-1 | 2/2-way sol valve, G1/8″ inlet, AC 110V, DIN type |
| MS18-1-2 | 2/2-way sol valve, G1/8″ inlet, AC 110V, DIN type, Lamp |
| Seal Kit | Please contact VMECA. |
Downloads
Catalog & CAD files| CAD 2D File | |
| VTM5X10 |
|
|---|---|
| VTM5X11 |
|
| VTM5X12 |
|
| VTM5X13 |
|
| VTM5X14 |
|
| VTM5X15 |
|
| VTM5X16 |
|
| VTM5X2 |
|
| VTM5X3 |
|
| VTM5X4 |
|
| VTM5X5 |
|
| VTM5X6 |
|
| VTM5X7 |
|
| VTM5X8 |
|
| VTM5X9 |
|
| CAD 3D File | |
| VTM5X10 |
|
| VTM5X11 |
|
| VTM5X12 |
|
| VTM5X13 |
|
| VTM5X14 |
|
| VTM5X15 |
|
| VTM5X16 |
|
| VTM5X2 |
|
| VTM5X3 |
|
| VTM5X4 |
|
| VTM5X5 |
|
| VTM5X6 |
|
| VTM5X7 |
|
| VTM5X8 |
|
| VTM5X9 |
|
| Catalog | |
| VTM5X(n) |
|
