P-Type Magic Cups

P-Type Lips

Category:

Description

Features and Strengths:

Examples of use:

Build an Order #


1. Top-Bellows

Symbol Description
B1.5 Top-Bellows, 1.5 folds
B2.5 Top-Bellows, 2.5 folds
B4.0 Top-Bellows, 1.5 folds + Middle Bellows, 2.5 folds
B5.0 Top-Bellows, 1.5 folds + Middle Bellows, 3.5 folds
B6.0 Top-Bellows, 2.5 folds + Middle Bellows, 3.5 folds

2. Top-Bellows Size

Symbol Description
20 20mm Diameter, only for P15, P17, P20, P27, P32-type Sealing Lips
40 40mm Diameter, only for P48, P60-type Sealing Lips
60 60mm Diameter, only for P72, P85-type Sealing Lips

3. Suction Lip

Symbol Description
P15 P-type Sealing Lip, 15 mm Dia.
P17 P-type Sealing Lip, 17 mm Dia.
P20 P-type Sealing Lip, 20 mm Dia.
P27 P-type Sealing Lip, 27 mm Dia.
P32 P-type Sealing Lip, 32 mm Dia.
P48 P-type Sealing Lip, 48 mm Dia.
P60 P-type Sealing Lip, 60 mm Dia.
P72 P-type Sealing Lip, 72 mm Dia.
P85 P-type Sealing Lip, 85 mm Dia.

4. Lip Material

Symbol Description
N6 Nitrile (NBR), 60° Hardness
S3 Silicone, 30° Hardness
S5 Silicone, 50° Hardness
W3 White Silicone, 30° Hardness
W5 White Silicone, 50° Hardness
W3(FDA) White Silicone, 30° Hardness (FDA)
W5(FDA) White Silicone, 50° Hardness (FDA)
U6 Urethane, 60° Hardness

5. Stopper

Symbol Description
D D-type

6. Disc Filter

Symbol Description
Blank No Vacuum Filter
F2 Vacuum Filter, 200 mesh

6. Fitting

Symbol Description
18F G1/8 Female
14F G1/4 Female
18M G1/8 Male
14M G1/4 Male
38M G3/8 Male

Specifications

1. Recommended Lifting Maximum Force

Part Number Volume Lifting Force (↑), Kg
P-type lip (cm³) -20 kPa -60 kPa -90 kPa
B1.5/20-P15 1.43 0.30 0.50 0.60
B1.5/20-P17 1.53 0.35 0.60 0.74
B1.5/20-P20 1.83 0.40 0.80 0.90
B1.5/20-P27 2.73 0.80 1.79 2.44
B1.5/20-P32 4.13 1.08 2.13 2.62
B1.5/40-P48 14.4 2.14 3.57 5.00
B1.5/40-P60 21.5 2.60 5.27 5.92
B1.5/60-P72        
B1.5/60/P85        
B2.5/20-P15 3.54 0.30 0.50 0.60
B2.5/20-P17 3.64 0.35 0.60 0.74
B2.5/20-P20 3.94 0.40 0.80 0.90
B2.5/20-P27 4.84 1.80 1.79 2.44
B2.5/20-P32 6.24 1.08 2.13 2.62
B2.5/40-P48 21.8 2.14 3.57 5.00
B2.5/40-P60 28.9 2.60 5.27 5.92
B2.5/60-P72        
B2.5/60/P85        
B4.0/20-P15 3.27 0.30 0.50 0.60
B4.0/20-P17 3.37 0.35 0.60 0.74
B4.0/20-P20 3.67 0.40 0.80 0.90
B4.0/20-P27 4.57 0.80 1.79 2.44
B4.0/20-P32 5.97 1.08 2.13 2.62
B4.0/40-P48 21.8 2.14 3.57 5.00
B4.0/40-P60 28.9 2.60 5.27 5.92
B4.0/60-P72        
B4.0/60/P85        
B5.0/20-P15 4.43 0.30 0.50 0.60
B5.0/20-P17 4.53 0.35 0.60 0.74
B5.0/20-P20 4.83 0.40 0.80 0.90
B5.0/20-P27 5.73 0.80 1.79 2.44
B5.0/20-P32 7.13 1.08 2.13 2.62
B5.0/40-P48 34.4 2.14 3.57 5.00
B5.0/40-P60 41.5 2.60 5.27 5.92
B5.0/60-P72        
B5.0/60/P85        
B6.0/20-P15 6.52 0.30 0.50 0.60
B6.0/20-P17 6.62 0.35 0.60 0.74
B6.0/20-P20 6.92 0.40 0.80 0.90
B6.0/20-P27 7.82 0.80 1.79 2.44
B6.0/20-P32 9.22 1.08 2.13 2.62
B6.0/40-P48 41.4 2.14 3.57 5.00
B6.0/40-P60 48.5 2.60 5.27 5.92
B6.0/60-P72        
B6.0/60/P85        

2. Material Specifications

Material Hardness Shore (°) Color Temperature (℃)
NBR/Nitrile – N6 60 Blue -20 ~ 110
Silicone – S3 30 Translucent White -70 ~ 200
Silicone – S5 50 Red -70 ~ 200
White Silicone – W3 30 Translucent White -70 ~ 200
White Silicone – W5 50 Translucent White -70 ~ 200
White Silicone – W3(FDA) 30 Translucent White -70 ~ 200
White Silicone – W5(FDA) 50 Translucent White -70 ~ 200
Urethane – U6 60 Dark Grey 0 ~ 100

3. Material Resistance

Description Wear Resistance Oil Weather/Ozone Alcohol Acid
NBR/Nitrile Excellent Excellent Fair Good Fair
Silicone Good Poor Excellent Good Poor
White Silicone Good Poor Excellent Good Poor
White Silicone /FDA Good Poor Excellent Good Poor
Urethane Excellent Excellent Excellent Fair Poor

Dimensions

B1.5, B4.0, B5.0 series

 
Unit: mm
Part Number φ A ST H* B*
B1.5/20-P15 15.5 0.8 28.1 37.1
B1.5/20-P17 17 0.9 28.5 37.5
B1.5/20-P20 20 0.9 29.4 38.4
B1.5/20-P27 27 1.4 30.4 39.4
B1.5/20-P32 34 1.5 32.8 41.8
B4.0/20-P15 15.5 0.8 38.9 47.9
B4.0/20-P17 17 0.9 39.3 48.3
B4.0/20-P20 20 0.9 40.2 49.2
B4.0/20-P27 27 1.4 41.2 50.2
B4.0/20-P32 34 1.5 43.6 52.6
B5.0/20-P15 15.5 0.8 43.9 52.9
B5.0/20-P17 17 0.9 44.3 53.3
B5.0/20-P20 20 0.9 45.2 54.2
B5.0/20-P27 27 1.4 46.2 55.2
B5.0/20-P32 34 1.5 48.6 57.6
B1.5/40-P48 48 1.7 46.0 55.0
B1.5/40-P60 60 2.8 49.0 58.0
B4.0/40-P48 48 1.7 68.4 77.4
B4.0/40-P60 60 2.8 71.4 80.4
B5.0/40-P48 48 1.7 78.3 87.3
B5.0/40-P60 60 2.8 81.3 90.3
B1.5/60-P72        
B1.5/60-P85        
B4.0/60-P72        
B4.0/60-P85        
B5.0/60-P72        
B5.0/60-P85        
* Dimension “H” and “B”: Measured with 1/4 male fitting
– Available Fitting Size: 1/8″, 1/4″, 3/8″ Male & 1/8″, 1/4″ Female,

 

B2.5, B6.0 series

Unit: mm
Part Number φ A ST H* B*
B2.5/20-P15 15.5 0.8 36.1 45.1
B2.5/20-P17 17 0.9 36.5 45.5
B2.5/20-P20 20 0.9 37.4 46.4
B2.5/20-P27 27 1.4 38.4 47.4
B2.5/20-P32 34 1.5 40.8 49.8
B6.0/20-P15 15.5 0.8 51.9 60.9
B6.0/20-P17 17 0.9 52.3 61.3
B6.0/20-P20 20 0.9 53.2 62.2
B6.0/20-P27 27 1.4 54.2 63.2
B6.0/20-P32 34 1.5 56.6 65.6
B2.5/40-P48 48 1.7 56.0 65.0
B2.5/40-P60 60 2.8 59.0 68.0
B6.0/40-P48 48 1.7 88.3 97.3
B6.0/40-P60 60 2.8 91.3 100.3
B2.5/60-P72 72      
B2.5/60-P85 85      
B6.0/60-P72 72      
B6.0/60-P85 85      
* Dimension “H” and “B”: Measured with 1/4 male fitting
– Available Fitting Size:1/8″, 1/4″, 3/8″ Male & 1/8″, 1/4″ Female,

Spare Parts

1. Top-Bellows

Part Number Description
TB1.5/20 1.5 Folds for P15, P17, P20, P27, P32-type Sealing Lips
TB1.5/40 1.5 Folds for P48, P60-type Sealing Lips
TB1.5/60 1.5 Folds for P72, P85-type Sealing Lips
TB2.5/20 2.5 Folds for P15, P17, P20, P27, P32-type Sealing Lips
TB2.5/40 2.5 Folds for P48, P60-type Sealing Lips
TB2.5/60 2.5 Folds for P72, P85-type Sealing Lips

2. Middle-Bellows

Part Number Description
MB2.5/20 2.5 Folds for P15, P17, P20, P27, P32-type Sealing Lips
MB2.5/40 2.5 Folds for P48, P60-type Sealing Lips
MB3.5/20 3.5 Folds for P15, P17, P20, P27, P32-type Sealing Lips
MB3.5/40 3.5 Folds for P48, P60-type Sealing Lips
MB3.5/60 3.5 Folds for P72, P85-type Sealing Lips

3. Stoppers

Part Number Description
MS20-D D-type, for P15, P17, P20, P27, P32-type Sealing Lips
MS40-D D-type, for P48, P60-type Sealing Lips
MS60-D D-type, for P72, P85-type Sealing Lips

4. Vacuum Filters

Part Number Description
VTFE20 Filter, 200 mesh, 20 mm Top & Middle Bellows
VTFE40 Filter, 200 mesh, 40 mm Top & Middle Bellows
VTFE60 Filter, 200 mesh, 60 mm Top & Middle Bellows

5. Suction Lips

Part Number Description
P15-N6 P-type, 15 mm Dia., Nitrile(NBR), 60° Hardness
P17-N6 P-type, 17 mm Dia., Nitrile(NBR), 60° Hardness
P20-N6 P-type, 20 mm Dia., Nitrile(NBR), 60° Hardness
P27-N6 P-type, 27 mm Dia., Nitrile(NBR), 60° Hardness
P32-N6 P-type, 32 mm Dia., Nitrile(NBR), 60° Hardness
P48-N6 P-type, 48 mm Dia., Nitrile(NBR), 60° Hardness
P60-N6 P-type, 60 mm Dia., Nitrile(NBR), 60° Hardness
P72-N6 P-type, 72 mm Dia., Nitrile(NBR), 60° Hardness
P85-N6 P-type, 85 mm Dia., Nitrile(NBR), 60° Hardness
P15-S3 P-type, 15 mm Dia., Silicone, 30° Hardness
P17-S3 P-type, 17 mm Dia., Silicone, 30° Hardness
P20-S3 P-type, 20 mm Dia., Silicone, 30° Hardness
P27-S3 P-type, 27 mm Dia., Silicone, 30° Hardness
P32-S3 P-type, 32 mm Dia., Silicone, 30° Hardness
P48-S3 P-type, 48 mm Dia., Silicone, 30° Hardness
P60-S3 P-type, 60 mm Dia., Silicone, 30° Hardness
P72-S3 P-type, 72 mm Dia., Silicone, 30° Hardness
P85-S3 P-type, 85 mm Dia., Silicone, 30° Hardness
P15-S5 P-type, 15 mm Dia., Silicone, 50° Hardness
P17-S5 P-type, 17 mm Dia., Silicone, 50° Hardness
P20-S5 P-type, 20 mm Dia., Silicone, 50° Hardness
P27-S5 P-type, 27 mm Dia., Silicone, 50° Hardness
P32-S5 P-type, 32 mm Dia., Silicone, 50° Hardness
P48-S5 P-type, 48 mm Dia., Silicone, 50° Hardness
P60-S5 P-type, 60 mm Dia., Silicone, 50° Hardness
P72-S5 P-type, 72 mm Dia., Silicone, 50° Hardness
P85-S5 P-type, 85 mm Dia., Silicone, 50° Hardness
P15-W3 P-type, 15 mm Dia., White Silicone, 30° Hardness
P17-W3 P-type, 17 mm Dia., White Silicone, 30° Hardness
P20-W3 P-type, 20 mm Dia., White Silicone, 30° Hardness
P27-W3 P-type, 27 mm Dia., White Silicone, 30° Hardness
P32-W3 P-type, 32 mm Dia., White Silicone, 30° Hardness
P48-W3 P-type, 48 mm Dia., White Silicone, 30° Hardness
P60-W3 P-type, 60 mm Dia., White Silicone, 30° Hardness
P72-W3 P-type, 72 mm Dia., White Silicone, 30° Hardness
P85-W3 P-type, 85 mm Dia., White Silicone, 30° Hardness
P15-W5 P-type, 15 mm Dia., White Silicone, 50° Hardness
P17-W5 P-type, 17 mm Dia., White Silicone, 50° Hardness
P20-W5 P-type, 20 mm Dia., White Silicone, 50° Hardness
P27-W5 P-type, 27 mm Dia., White Silicone, 50° Hardness
P32-W5 P-type, 32 mm Dia., White Silicone, 50° Hardness
P48-W5 P-type, 48 mm Dia., White Silicone, 50° Hardness
P60-W5 P-type, 60 mm Dia., White Silicone, 50° Hardness
P72-W5 P-type, 72 mm Dia., White Silicone, 50° Hardness
P85-W5 P-type, 85 mm Dia., White Silicone, 50° Hardness
P15-W3(FDA) P-type, 15 mm Dia., White Silicone, 30° Hardness (FDA)
P17-W3(FDA) P-type, 17 mm Dia., White Silicone, 30° Hardness (FDA)
P20-W3(FDA) P-type, 20 mm Dia., White Silicone, 30° Hardness (FDA)
P27-W3(FDA) P-type, 27 mm Dia., White Silicone, 30° Hardness (FDA)
P32-W3(FDA) P-type, 32 mm Dia., White Silicone, 30° Hardness (FDA)
P48-W3(FDA) P-type, 48 mm Dia., White Silicone, 30° Hardness (FDA)
P60-W3(FDA) P-type, 60 mm Dia., White Silicone, 30° Hardness (FDA)
P72-W3(FDA) P-type, 72 mm Dia., White Silicone, 30° Hardness (FDA)
P85-W3(FDA) P-type, 85 mm Dia., White Silicone, 30° Hardness (FDA)
P15-W5(FDA) P-type, 15 mm Dia., White Silicone, 50° Hardness (FDA)
P17-W5(FDA) P-type, 17 mm Dia., White Silicone, 50° Hardness (FDA)
P20-W5(FDA) P-type, 20 mm Dia., White Silicone, 50° Hardness (FDA)
P27-W5(FDA) P-type, 27 mm Dia., White Silicone, 50° Hardness (FDA)
P32-W5(FDA) P-type, 32 mm Dia., White Silicone, 50° Hardness (FDA)
P48-W5(FDA) P-type, 48 mm Dia., White Silicone, 50° Hardness (FDA)
P60-W5(FDA) P-type, 60 mm Dia., White Silicone, 50° Hardness (FDA)
P72-W5(FDA) P-type, 72 mm Dia., White Silicone, 50° Hardness (FDA)
P85-W5(FDA) P-type, 85 mm Dia., White Silicone, 50° Hardness (FDA)
P15-U6 P-type, 15 mm Dia., Urethane, 60° Hardness
P17-U6 P-type, 17 mm Dia., Urethane, 60° Hardness
P20-U6 P-type, 20 mm Dia., Urethane, 60° Hardness
P27-U6 P-type, 27 mm Dia., Urethane, 60° Hardness
P32-U6 P-type, 32 mm Dia., Urethane, 60° Hardness
P48-U6 P-type, 48 mm Dia., Urethane, 60° Hardness
P60-U6 P-type, 60 mm Dia., Urethane, 60° Hardness
P72-U6 P-type, 72 mm Dia., Urethane, 60° Hardness
P85-U6 P-type, 85 mm Dia., Urethane, 60° Hardness

6. Fittings

Part Number Description
350-003-1101 G1/8 Female, for 20 mm Top & Middle Bellows
350-003-1501 G1/4 Female, for 20 mm Top & Middle Bellows
350-003-1201 G1/8 Male, for 20 mm Top & Middle Bellows
350-003-1301 G1/4 Male, for 20 mm Top & Middle Bellows
350-003-1401 G3/8 Male, for 20 mm Top & Middle Bellows
350-003-1102 G1/8 Female, for 40 mm Top & Middle Bellows
350-003-1502 G1/4 Female, for 40 mm Top & Middle Bellows
350-003-1202 G1/8 Male, for 40 mm Top & Middle Bellows
350-003-1302 G1/4 Male, for 40 mm Top & Middle Bellows
350-003-1402 G3/8 Male, for 40 mm Top & Middle Bellows
350-003-1107 G1/8 Female, for 60 mm Top & Middle Bellows
350-003-1307 G1/4 Male, for 60 mm Top & Middle Bellows
350-003-1407 G3/8 Male, for 60 mm Top & Middle Bellows
350-003-1707 G3/8 Female, for 60 mm Top & Middle Bellows
REQUEST A QUOTE

Related products

Title

VMECA Co., Ltd. | 24 Beotkkot-ro 10-gil (Doksan-dong) Geumcheon-gu Seoul 08606, Korea |
Managing Director (CEO) Mr. Hoyoung Cho | Business registration certificate No. : 133-81-20585 |
Tel.: (02)2617-5008 | Fax: (02)808-0013 | E-mail: [email protected] | Copyright VMECA Co., Ltd. All rights reserved.

Family Page