VTOM5X(n)
Beschreibung
Dieses Oneline Modell verwendet einzelne Pumpen, um eine vollständige Einheit zu bilden. Jede Pumpe ist in sich eine mehrstufige Ejektoreinheit. Jede einzelne Pumpe kann mit anderen Pumpen zusammen zu einer Mehrfacheinheit zusammengefasst werden, wodurch ein modulares System auf der Grundlage von Batterie entsteht. Die Vorteile dieser Einheit liegen darin, dass sie mit nur zwei Steuerventilen betrieben werden kann, während die einzelnen Vakuumleitungen getrennt voneinander gehalten werden. Wenn also eine Leckage oder Oberflächenverformung auftritt und ein Sauger Vakuum verliert, wirkt sich dies nicht auf das Vakuumniveau der anderen Sauger aus.
Bestellnummer
1. Basis-Modell
Zeichen | Beschreibung |
VTOM5 | Minimultiple, VTOM5 |
2. Basis-Modell
Zeichen | Beschreibung |
4 | VTOM5, 4-stacked pump |
5 | VTOM5, 5-stacked pump |
6 | VTOM5, 6-stacked pump |
7 | VTOM5, 7-stacked pump |
8 | VTOM5, 8-stacked pump |
9 | VTOM5, 9-stacked pump |
10 | VTOM5, 10-stacked pump |
11 | VTOM5, 11-stacked pump |
12 | VTOM5, 12-stacked pump |
13 | VTOM5, 13-stacked pump |
14 | VTOM5, 14-stacked pump |
15 | VTOM5, 15-stacked pump |
16 | VTOM5, 16-stacked pump |
3. Luftsteuerventil
Zeichen | Beschreibung |
Blank | No air control valve |
A1 | Air control valve, AC 110V |
A2 | Air control valve, AC 220V |
A3 | Air control valve, DC 24V |
4. Vacuum Release Control Valve
Zeichen | Beschreibung |
Blank | No vacuum release control valve |
R1 | Vacuum release control valve, AC 110V |
R2 | Vacuum release control valve, AC 220V |
R3 | Vacuum release control valve, DC 24V |
5. Ventilsteckverbindung
Zeichen | Beschreibung |
Blank | No air control valve ☛ „Option 2“, Air control valve |
DN | Solenoid terminal, DIN type, No lead wire |
DL | Solenoid terminal, DIN type, No lead wire, Lamp |
CL | Solenoid terminal, Connector type, 30 cm lead wire |
☛ „The valve terminal “ option is only available when you chose air control valve. | |
☛ “CL” option is only available with DC24V. | |
2B | Solenoid terminal, DIN, 2-in-1 BUS cable |
6. Dichtungsmaterial
Zeichen | Beschreibung |
Blank | NBR sealing material |
V | Viton sealing material |
E | EPDM sealing material |
Angaben
1. Allgemeine Angaben
Max Vacuum Level | -85 kPa |
Open Vacuum Flow | 27 Nl/min |
Feed Pressure | 5.5 bar (Max 7 bar) |
Air Consumption | 21 Nl/min |
Temperature | -20 ~ 80 ℃ |
Weight – 2-stacked pump | 360 g (Increased 35 g per additional stack) |
2. Vacuum Flow
Max Vacuum | Feed Pressure | Vacuum Flow (Nl/min) at different vacuum level (-kPa) | |||||||||
-kPa | bar | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 |
85 | 5.5 | 27 | 16 | 13 | 12 | 11 | 8 | 6 | 2.4 | 0.66 | – |
3. Evacuation Time
Feed Pressure | Air Consumption | Evacuation time in sec per liter to reach different vacuum level (-kPa) | ||||||||
bar | Nl/min | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 |
5.5 | 21 | 0.218 | 0.556 | 1.00 | 1.576 | 2.356 | 3.44 | 5.27 | 10.216 | – |
Maße
VTOM5X(n): |
Unit: mm |
|
|
Bestellnummern
Vacuum Pumps & Spare Parts
Part Number | Beschreibung |
MS18-3-1 | 2/2-way sol valve, G1/8″ inlet, DC 24V, DIN type |
MS18-3-2 | 2/2-way sol valve, G1/8″ inlet, DC 24V, DIN type, Lamp |
MS18-3-3 | 2/2-way sol valve, G1/8″ inlet, DC 24V, Conn. type, 30 cm lead wire & Lamp |
MS18-2-1 | 2/2-way sol valve, G1/8″ inlet, AC 220V, DIN type |
MS18-2-2 | 2/2-way sol valve, G1/8″ inlet, AC 220V, DIN type, Lamp |
MS18-1-1 | 2/2-way sol valve, G1/8″ inlet, AC 110V, DIN type |
MS18-1-2 | 2/2-way sol valve, G1/8″ inlet, AC 110V, DIN type, Lamp |
VMS14-3-1 | 2/2-way sol valve, G1/4″ Inlet, DC 24V, DIN type |
VMS14-3-2 | 2/2-way sol valve, G1/4″ Inlet, DC 24V, DIN type, Lamp |
VMS14-3-3 | 2/2-way sol valve, G1/4″ Inlet, DC 24V, Conn. type, 30 cm lead wire & Lamp |
VMS14-2-1 | 2/2-way sol valve, G1/4″ Inlet, AC 220V, DIN type |
VMS14-2-2 | 2/2-way sol valve, G1/4″ Inlet, AC 220V, DIN type, Lamp |
VMS14-1-1 | 2/2-way sol valve, G1/4″ Inlet, AC 110V, DIN type |
Seal Kit | Please contact VMECA. |