Sign-In | Register | CAD Center | Select a Region -

Vacuum Accessories

Choose from these excellent vacuum accessories to fully maximize the potential of our products capabilities. Many OEMs and manufacturers rely on these accessories to run their applications smoothly and efficiently.

Vacuum Filters


 

Line Vacuum Filters
Simply pushing the tube into the LV-filter. Excellent filtering
Easy to check and replaceable filter element inside

Line Vacuum Filters 
These filters provide a cost effective in line vacuum filtration method. The 6mm push fit version is useful for individual lines particularly with the Oneline pump & Multiple stack pumps. 

Turtle Vacuum Filters 
Patented design. Pleated Media for High Dirt Holding Capacity. Compact size. Easy to disassemble. Moisture resistant. Washable filter element-lukewarm water & mild detergent

Bowl Vacuum Filters 
There filters are useful in conjunction with the larger pumps which use bigger conjunction parts i.e. 3/8″. All filters use a detachable bowl and a replaceable element inside. The housing of the filter comes complete with a surface mounting bracket, this bracket can be mounted either side of the housing.

Mega Vacuum Filters 
This particular vacuum filter is made by steel Hosing, Clip on Bracket and filter element available in PE material or paper. This enable the element can be blown off with compressed air before replaced. This range of Mega filters are useful in conjunction with the larger pumps need highest filter capacity.




Vacuum Switches


 

V16 Series Vacuum Switches
• Vacuum Pressure: -29.8 to 0 inHg
• Sensor Outputs: 2 NPN or PNP Open Collector Transistor Output , 30VDC, 80mA
• Hysteresis Mode
• Output Response Time Less Than 5.0 Milliseconds
• Air and Non-Corrosive Gases

V17 Series Vacuum Switches
• Vacuum Pressure: -29.9 to 0 inHg
• Sensor Outputs: 2 NPN or PNP Open Collector Transistor Output , 30VDC, 80mA
• Hysteresis and Window Comparator Mode
• Output Response Time Less Than 25.0 Milliseconds
• Air and Non-Corrosive Gases

VP20 Series Vacuum Switches 
• Vacuum Pressure: 0 to -29.9 inHg
• Sensor Outputs: 2 NPN or PNP Open Collector Transistor Output , 30VDC, 80mA
• Hysteresis and Window Comparator Mode
• Output Response Time Less Than 2.5 Milliseconds
• Air and Non-Corrosive Gases

VES Series Electro-Mechanical Vacuum Switches
These switches use a vacuum actuated membrane to operate a mechanical micro switch. All switches can be wired Normally Closed or Normally Open. The vacuum level to which the switch operates can be set with the manually adjustable and lockable screw. The VES-02B comes with two fixing holes molded into the housing, whereas the VES-01B comes with fixings in two extended ears.

VPS Series Pneumatic Vacuum Switches
These switches are used to convert a vacuum signal into a pneumatic signal, e.g. for use with an Air Saving kit. The switch uses a vacuum actuated membrane to operate a pressure Air 3/2 way Valve. The level at which the pressure Air Valve will operate can be adjusted using the lockable screw. Two options of valve are available a normally closed version or a normally open version.




Valves


 

V10 Series
• Vacuum Pressure: 0 to -29.9 inHg
• Sensor Outputs: 2 NPN or PNP Open Collector Transistor Output , 30VDC, 80mA
• Hysteresis and Window Comparator Mode
• Output Response Time Less Than 2.5 Milliseconds
• Air and Non-Corrosive Gases

VP32 Series
• Sensor Outputs: 2 NPN or PNP Open Collector Transistor Output, 30VDC, 80mA
• Hysteresis and Window Comparator Mode
• Output Response Time Less Than 25.0 Milliseconds
• Applicable fluid: air, noncorrosive gas, incombustible gas

MS18 Series Air Control Valves
2/2 way solenoid valve G1/8" or NPSF1/8" indirectly operated with spring return. These valves are compact and can control high flow rate of air.

VMS14 Series Air Control Valves
2/2 way solenoid valve G1/4" or NPSF1/4" indirectly operated with spring return. These valves are compact and can control high flow rate of air.

VMS14D Series Air Control Double Sol. Valves
2/2 way solenoid valve G1/4" or NPSF1/4" indirectly operated with spring return. These valves are compact and can control high flow rate of air.

VMS38 Series Air Control Valves
2/2 way solenoid valve G1/8" or NPSF1/8" indirectly operated with spring return. These valves are compact and can control high flow rate of air.




etc.


 

Pressure Gauge
• Compressed Air: 0-140psi (0~10bar)
• Accuracy: ±2.5% Full Scale
• Material: Brass, ABS, PMMA
• Weight (oz.): 2.04-with nut, 1.83-without nut
This pressure gauge is high quality and long life product. Specially, can be mounted directly into the panel with fixing nut.

Vacuum Gauge
• Vacuum Level: -30 inHg (0 to -100kPa)
• Accuracy: ±1.6% Full scale
• Material: Brass, ABS, PMMA
• Weight (oz.): 2.04-with nut, 1.83-without nut
This pressure gauge is high quality and long life product. Specially, can be mounted directly into the panel with fixing nut.

Silencers
These silencers are fitted to many of the vacuum pumps. They significantly reduce noise levels on all air exhaust outlet. Six sizes are available ranging from 1/8” up to 1”.

Air & Vacuum Manifolds
It is important to maintain pipe bore size on vacuum circuits when using more than one suction cup. The VMECA manifolds enable multiple connections to be made back to one common large BSP connection. The manifolds are very compact and are available in a number of configurations to suit most applications.