Sign-In | Register | CAD Center | Select a Region -

V10 Series

Vacuum Switch
Features and Strengths

• Vacuum Pressure: 0 to -29.9 inHg
• Sensor Outputs: 2 NPN or PNP Open Collector Transistor Output , 30VDC, 80mA
• Hysteresis and Window Comparator Mode
• Output Response Time Less Than 2.5 Milliseconds
• Air and Non-Corrosive Gases

 
1. Model

Related Products
V16 series, V17 series
VES series, VPS series
VP20 series, VP32 series
Accessories Main Page
Code Description
   
1) Switch Type
V10 Vacuum (0~-101.3 kPa)
V10P Positive (0~0.6 MPa)
   
2) Output Type
01 NPN
02 PNP
   
3) Pressure Port
F1 1/8” PT, M5
F2 1/8” NPT, M5
F3 M5
F4 Ø4mm Tube
F5 Ø6mm Tube
   
4) Cable Specification  
No Mark Lead Wire Type (3m)
C M8-3Pin Male Connector
   
   
2. Specifications
Specifications V10 (Vacuum) V10P (Positive)
Setting pressure range 0 ~ -101.3 kPa 0 ~ -0.6 MPa
Withstand pressure 0.6 MPa 1.5 MPa
Fluid Air, Non-corrosive / Non-flammable gas
Power supply voltage 10.8 to 30V DC (include ripple voltage)
Load current 80mA max.
Internal voltage drop NPN/0.8V, PNP/0.8V
Current consumption 10 mA max.
Sensor type NPN or PNP
Ooutput short circuit protection Yes
Setting method Adjusting by VR
Response time Approx. 1ms
Repeatability ≤±1% F.S
Hysteresis 3% F.S max.
Indicator Red LED turns ON
Enclosure IP 40
Temperature characteristic ≤±3% F.S. of detected pressure (25˚C) attemp. Range of 0~50˚C (32~122˚F)
Ambient temp. rnage Operation: 0 ~ 60˚C (32~140˚F), No condensation or freezing
Ambient humidity range Operation/storage: 35~85% RH(No condensation)
Vibration Total amplitude 1.5mm, 10Hz-55Hz-10Hz scan for 1 minute, two hours each direction of X, Y and Z
Piping method Push-in tube or thread-in
Lead wire Oil-resistance cable, 3wires (0.18mm²),φ 2.6mm, 3M
Weight Approx. *50(with 3-meter lead wire)
   
 

3. Dimensions


 
 
4. Circuit Diagrams

 
5. Output Type

 

How to set up your Pressure? ●Turn power “On” by using a pressure setting trimmer.

●Turn the dial clockwise to increase pressure setting.

●Turn the dial counterclockwise to decrease pressure setting.

●Do not forcefully over-turn the setting trimmer to prevent it from breaking.

A well fitted flat-head screwdriver is to be used gently when setting the trimmer.

Download V10 Series Catalog

Related Products
V16 series | V17 series | VES series | VPS series | VP20 series | VP32 series | Accessories Main Page